کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1824884 | 1027347 | 2011 | 5 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Lattice design and optimization for the PEP-X ultra low emittance storage ring at SLAC Lattice design and optimization for the PEP-X ultra low emittance storage ring at SLAC](/preview/png/1824884.png)
SLAC is developing a long-range plan to transfer the evolving scientific programs at SSRL from the SPEAR3 light source to a much higher performing photon source. One of the possibilities is a new PEP-X 4.5GeV storage ring that would be housed in the 2.2 km PEP-II tunnel (Hettel et al., 2008 [1]; Hettel et al., to be published [2]). The PEP-X is designed to produce photon beams having brightness near 1022 (ph/s/mm2/mrad2/0.1% BW) at 10 keV with 3.5 m undulators at beam current of 1.5 A. This report presents an overview of the PEP-X baseline lattice design and describes the lattice optimization procedures in order to maximize the beam dynamic aperture (Wang et al., 2010 [3]). The complete report of PEP-X baseline design is published in SLAC report (Bane et al., 2010 [4]).
Journal: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment - Volume 649, Issue 1, 1 September 2011, Pages 30–34