کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1825438 | 1027363 | 2011 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of thin self-supporting platinum targets using evaporation techniques
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
فیزیک و نجوم
ابزار دقیق
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Thin self-supporting isotopic platinum (Pt) targets of 130–200 μg/cm2 thickness have been prepared by evaporation technique, using selective etching and parting reagent methods. The evaporation yield of the selective etching method was higher in comparison to the parting reagent method. Further, the purity of targets formed has been accessed by the Energy Dispersive X-ray Fluorescence (EDXRF) and Elastic Recoil Detection Analysis (ERDA) techniques. The analysis indicated that the targets prepared by the selective etching method contain 2 wt% of Cu. Contamination of C was found to be 2.5 wt% in the targets prepared by both of these methods.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment - Volume 635, Issue 1, 11 April 2011, Pages 20–23
Journal: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment - Volume 635, Issue 1, 11 April 2011, Pages 20–23
نویسندگان
Varinderjit Singh, S.R. Abhilash, B.R. Behera, D. Kabiraj,