کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1830061 | 1027471 | 2007 | 6 صفحه PDF | دانلود رایگان |

Within the R&D Program for the luminosity upgrade proposed for the Large Hadron Collider (LHC), silicon strip detectors (SSD) and test structures (TS) were manufactured on several high-resistivity substrates: p-type Magnetic Czochralski (MCz) and Float Zone (FZ), and n-type FZ. To test total dose (TID) effects they were irradiated with 60Co gammas and the impact of surface radiation damage on the detector properties was studied. Selected results from the pre-rad and post-rad characterization of detectors and TS are presented, in particular interstrip capacitance and resistance, break-down voltage, flatband voltage and oxide charge. Surface damage effects show saturation after 150 krad and breakdown performance improves considerably after 210 krad. Annealing was performed both at room temperature and at 60 °C, and large effects on the surface parameters observed.
Journal: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment - Volume 579, Issue 2, 1 September 2007, Pages 769–774