Thermogravimetric study on pyrolysis of biomass with Cu/Al2O3 catalysts

The Cu/Al2O3 catalysts of three different compositions (10, 20 and 30 wt.% Cu loading), have been investigated with regard to their catalytic effects on pyrolysis of paper biomass species (up to 800 °C) by thermogravimetric analysis (TGA) experiments. The results show that catalysts made devolatilization at lower (below 200 °C) and middle temperature (200–400 °C) regions in the pyrolysis of the biomass species, and the temperature reduction effects follow the order: 30 > 20 > 10 wt.% copper loading. Although the catalysts with 10 and 20 wt.% copper have shown almost similar activity, whereas dehydration reaction was enhanced almost 40% in the presence of 30 wt.% copper-loaded catalyst. At the same time, the amount of residue at the end of the reaction also decreased with increase in the copper loading from 10 to 30 wt.%. At higher temperatures (above 400 °C), the catalyst with greater copper loaded worked more nicely possibly due to the enhancement of the depolymerization reaction over dehydration of cellulose in presence of more basic catalysts. The catalysts were characterized by using X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface area analysis and scanning electron microscopy (SEM). XRD results show the formation of CuAl2O4 spinel and Cu2O phase in the catalysts.