کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
235857 | 465651 | 2015 | 6 صفحه PDF | دانلود رایگان |
• A water soluble binder system for titanium injection moulding was developed.
• The rheological properties of the newly developed feedstock were reported.
• The feedstock formulation was optimised.
Binder selection and formulation are critical in powder injection moulding. Binders play a key role in controlling the rheological properties of a feedstock and influence whether the resulting feedstock can be successfully injection moulded, debound and sintered without defects. A four-step process was used to mix hydride-dehydride titanium alloy (processed) powder (Ti–6Al–4V) with a polyethylene glycol (PEG) based water soluble binder system. The rheological properties, including flow behaviour index, flow activation energy, fluidity and melt flow index of the homogeneous feedstock, were determined with a capillary rheometer. All feedstock formulations exhibited shear thinning flow behaviour. The optimum feedstock consisting of 60 vol.% powder content, 32 vol.% PEG, 6 vol.% polyvinyl butyryl and 2 vol.% stearic acid was suitable for titanium injection moulding.
Figure optionsDownload as PowerPoint slide
Journal: Powder Technology - Volume 269, January 2015, Pages 227–232