Synthesis of magnetite powder from iron ore tailings

Iron ore tailing—a waste material of mineral beneficiation plants, is used as a source of iron for synthesizing magnetite powder. Iron ore tailings containing 15.98% Fe2O3, 83.36% SiO2 and 0.44% Al2O3 have been subjected to HCl digestion on a hot plate to extract the entire amount of Fe2O3 as FeCl3. A portion of extracted FeCl3 solution has been used to convert it to FeCl2 via metallic iron formation by using NaBH4 as a reducing reagent. Then, the left out FeCl3 solution and derived FeCl2 solutions (from FeCl3) are mixed in an appropriate molar ratio (2:1) for synthesizing magnetite powder by the addition of alkali solution. The magnetite powder samples have been characterized by means of powder XRD, SEM, vibrating sample magnetometer and laser particle size analyzer. XRD study confirms the formation of magnetite phase. The magnetite particles synthesized in different ways show varying degrees of magnetization behavior which is attributed to the change in their particle size induced by the use of different precipitating reagents.

Magnetite powder has a lot of industrial application. We explore the possibility of synthesizing it from iron ore tailing—a waste material produced during hematite beneficiation. Two synthesizing methods are employed and the magnetic property of the powder samples has been tried. The result of the research is quite encouraging and it opens up a new direction in the search for a chemical synthesis method for magnetite targeting industrial applications.Figure optionsDownload as PowerPoint slide