Jet cup attrition testing

Jet cup attrition testing is a common method for evaluating particle attrition in fixed fluidized beds and circulating fluidized beds. An attrition index, calculated from jet cup data, is used to compare with one or more reference materials. However, this method is far from perfect despite its popularity. Results obtained at Particulate Solid Research, Inc. (PSRI) in different-sized jet cups and a 29-cm (11.5-in.) diameter fluidized bed test unit did not provide the same ranking of catalyst with respect to particle attrition. To obtain a better understanding of attrition in a jet cup, both computational fluid dynamics (CFD) and cold flow studies were performed with a 2.5-cm (1-in.) diameter Davison-type jet cup and PSRI's cylindrical 7.6-cm (3-in.) diameter jet cup. Results showed that a significant amount of material in the Davison and PSRI jet cup remained stagnant. Based on these results and additional CFD modeling, PSRI designed a new jet cup, where most of the material was hydrodynamically active. The new jet cup showed a 25% increase in attrition compared to PSRI's cylindrical jet cup under similar conditions and run times. Results were also compared to cyclone attrition data for several materials at PSRI. The new jet cup provided data that correlated with attrition results from the 29-cm (11.5-in.) diameter fluidized bed unit.

Davison-type jet cup attrition testing is a popular method for evaluating particle attrition in fixed fluidized beds and circulating fluidized beds. Yet, results show that this cylindrical-shaped cup may not be optimum for particle attrition. Experimental and CFD results suggest that a conical-shaped cup provides better attrition.Figure optionsDownload as PowerPoint slide