Strength and breakage of activated sludge flocs

The breakage of activated sludge flocs under turbulent shear conditions was investigated as a function of floc size. Municipal activated sludge flocs were fractionated by sieving to narrow size fractions. Shear stress distribution functions for the breakage of activated sludge floc samples were obtained. It was found that by increasing the floc size, this distribution was skewed towards smaller shear stress values and became broader. Results of experiments showed that the median shear stress, τ50, required for floc breakage reduced by about 23% from 3.9 Pa for 45–63 μm sieve fraction to 3 Pa for the 150–180 μm sieve fraction. Under steady conditions, the median shear stress for the breakage of fragments that formed due to the breakage of larger flocs was as much as three times larger than that of the original flocs.

Graphical AbstractFigure optionsDownload as PowerPoint slideShear stress distribution for the breakage of wastewater activated sludge floc samples for various sieve size ranges.