Heat transfer in a particle curtain falling through a horizontally-flowing gas stream

A study of heat transfer between horizontally-flowing air and a free-falling particle curtain was reported. A steady and uniformly distributed stream of cold particles was fed through a rectangular slit and allowed to fall to form a curtain across the entire width of a horizontal duct of cross-section of 0.15 × 0.60 m. Warm air, at velocities in the range of 0.9 m/s to 1.2 m/s and with a uniform velocity profile, flowed horizontally through the duct. A range of curtain thickness (4 cm to 10 cm) and mass flow rate (0.031 kg/s to 0.040 kg/s) were used to investigate the heat transfer characteristic of the free-falling particle curtain in a uniform cross-flowing gas. Particle temperatures within the curtain and air temperatures outside the curtain were measured as a function of vertical position in the duct. A simple model based on single particle behaviour was developed. The predicted solid temperatures agreed well with the experimental results. However, the predictions for the gas temperatures were less satisfactory.

A study of heat transfer between horizontally-flowing air and a free-falling particle curtain was reported. A uniform stream of cold particles was fed through a rectangular slit and allowed to fall to form a curtain. A simple model based on single particle behaviour was developed. The predicted solid and gas temperatures were compared with the experimental results.Figure optionsDownload as PowerPoint slide