Measurement of solid circulation rate in a circulating fluidized bed

A method using an optical mouse sensor was developed to monitor the moving velocity of a solid mass. Calibration was carried out using a rotating plate. Results clarified that the developed method is useful to monitor the velocity up to some limit (v < 0.3 m/s), which depends on the optical mouse sensor used. A solid circulation rate in a circulating fluidized bed (CFB) was measured using this method. Results obtained using this method show agreement with those of visual observations.

Graphical AbstractA method using an optical mouse sensor was developed to monitor the moving velocity of a solid mass. Calibration was carried out using a rotating plate. Results clarified that the developed method can monitor the velocity up to some limit (v < 0.3 m/s), which depends on the optical mouse sensor used. A solid circulation rate in a circulating fluidized bed (CFB) was measured using this method. Results obtained using this method show agreement with those of visual observations. Following figure shows a typical result of descending velocity of solid mass in the downcomer of the CFB obtained using this method.Figure optionsDownload as PowerPoint slide