In Situ Coating of Natural Rubber Film with Poly(vinyl chloride) Resin

Film formation of poly(vinyl chloride) resin (rPVC) coating on natural rubber (NR) surface in solid state was prepared and investigated. The mixtures of rPVC with NR were compressed at 170 °C for 15 min and found that the rPVC was migrated and coated on the NR surface which was proved by the images from Scanning Electron Microscope (SEM) and Atomic Force Microscope (AFM). The coated NR films with rPVC loading 5 and 10 phr are stronger and higher dielectric constant than uncoated NR film. Very high loading of rPVC for 50 and 100 phr result in decreasing of tensile strength and dielectric constant.