کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
243455 501929 2013 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Constant pressure hydraulic energy storage through a variable area piston hydraulic accumulator
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی مهندسی انرژی و فناوری های برق
پیش نمایش صفحه اول مقاله
Constant pressure hydraulic energy storage through a variable area piston hydraulic accumulator
چکیده انگلیسی

Hydraulic accumulators are used in a variety of applications to minimize the pressure variation in hydraulic circuits and to store energy. Conventional hydraulic accumulators suffer from two major limitations, the hydraulic system pressure varies with the quantity of energy stored and the energy density is significantly lower than other energy domains. In this paper, a novel hydraulic accumulator is presented that uses a piston with an area that varies with stroke to maintain a constant hydraulic system pressure while the gas pressure changes. The variable area piston is sealed with a fabric reinforced rolling diaphragm. In this work, the piston radius profile is developed as a function of the piston displacement and then transformed into a function of the axial contact location between the piston and the diaphragm. The piston profile was solved numerically for a variety of conditions using both transformation methods to illustrate the geometric design trade-offs. Using a variable area gas piston with a fixed cylinder area, the maximum gas volume ratio was 1.8:1. An analysis of the energy density revealed that the constant pressure accumulator provides a 16% improvement in energy density over a conventional accumulator at a volume ratio of 2.71:1 and also exceeds the maximum energy density of a conventional accumulator at the lower volume ratio of 1.8:1. This new promising technology maintains a constant hydraulic system pressure independent of the quantity of energy stored, easing system control and allowing other circuit components to be downsized to meet the same power requirements, while also increases the energy storage density.


► A novel constant pressure accumulator is presented that uses a variable area piston.
► The variable area piston is sealed with a rolling diaphragm seal.
► Two solution methods for the piston profile are presented and compared.
► The device improves the energy density by 16% over conventional accumulators.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Energy - Volume 105, May 2013, Pages 262–270
نویسندگان
,