Sorption of VOCs on material surfaces as the deciding factor when choosing a ventilation strategy

The interaction between different ventilation strategies, and the adsorption and desorption of volatile organic compounds on material surfaces in small test chambers, is investigated. In test chamber experiments, nylon carpet was exposed to a mixture of toluene and α-pinene at two different dosing rates. The ventilation strategies were chosen to mimic the conditions in real buildings, i.e. with an air exchange rate of 2 h−1 during the working day (8–17) and a rate of 0.67 h−1 during the remainder of the 24 h. The results show that the sorption behavior has to be included when estimating the concentration variations in a room based on source characteristics and ventilation rates. The software application “EnviSim” was used to model the concentrations in a model room based on the experimental conditions. As the ventilation strategy influences the resulting concentrations, it is recommended that the ventilation system be “turned on” a couple of hours before the start of the working day and “turned down” again soon after the occupants have left the building.