کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
252323 | 502961 | 2012 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Low-impulse blast behaviour of fibre-metal laminates Low-impulse blast behaviour of fibre-metal laminates](/preview/png/252323.png)
This paper presents three dimensional (3D) finite element (FE) models of the low-impulse localised blast loading response of fibre-metal laminates (FMLs) based on an 2024-O aluminium alloy and a woven glass-fibre/polypropylene composite (GFPP). A vectorized user material subroutine (VUMAT) is developed to define the mechanical constitutive behaviour and Hashin’s 3D failure criteria incorporating strain-rate effects in the GFPP. In order to apply localised blast loading, a user subroutine VDLOAD is used to model the pressure distribution over the exposed area of the plate. These subroutines are implemented into the commercial finite element code ABAQUS/Explicit to model the deformation and failure mechanisms in FMLs. The FE models consider FMLs based on various stacking configurations. Both the transient and permanent displacements of the laminates are investigated. Good correlation is obtained between the measured experimental and numerical displacements, the panel deformations and failure modes. By using the validated models, parametric studies can be carried out to optimise the blast resistance of FMLs based on a range of stacking sequences and layer thicknesses.
Journal: Composite Structures - Volume 94, Issue 3, February 2012, Pages 954–965