The ankle–brachial index in clinical decision making

BackgroundThe ankle–brachial index (ABI) is an important tool for assessment of peripheral vascular disease. Diverse methods/equations for determining the ABI have been reported as well as different cut-off values used to indicate the presence of vascular pathology.Objectives(i) Investigate the role of the brachial component to determine the ABI, and (ii) investigate the influence of different lower cut-off values.MethodThree methods/equations of utilising the brachial value were used to determine the ABI of 522 individuals. Ankle blood pressure readings were divided by: (i) average of the left and right brachial reading (AVERAGE); (ii) highest of left and right brachial reading (HIGHEST); (iii) higher brachial pressure was used unless the brachial pressures differed by less than 15 mmHg between the right and left side in which case the average was used (PROVISO). For these three methods/equations cut-off points were set at 0.8. 0.9 and 1.0. Data were analysed using one-way analysis of variance for continuous data and χ2 analysis for categorical data.ResultsComparison between the three methods/equations used to determine the ABI showed a statistically significant difference between the AVERAGE and HIGHEST method/equation (p = 0.005). Further, varying the cut-off values for each of the methods also showed statistically significant differences (p < 0.001).ConclusionEvidence-based data are currently insufficient for development of peripheral vascular diagnostic guidelines. Our research indicated that the method and cut-off value chosen for the ABI can lead to statistically significant differences in the number of people identified with possible peripheral vascular disease.