Development of low-noise drag-type vertical wind turbines

• Noise generation mechanism of a Savonius WT is investigated by using the Hybrid CAA techniques.
• Two distinct tonal components are identified as dominant noise sources.
• New blade designs with S-shaped trailing edge are suggested to reduce these components.
• Maximum noise reduction by about 2.7 dB is achieved.

In this study, the aerodynamic noise characteristics of Savonius wind turbines were investigated using hybrid computational aero-acoustics techniques, and low-noise designs were proposed based on the understanding of the noise generation mechanism. First, the flow field around the turbine was analyzed in detail by solving three-dimensional unsteady incompressible Reynolds-averaged Navier–Stokes equations using computational fluid dynamics techniques. Then, the aerodynamic noise radiating from the wind turbine was predicted using the Ffowcs Williams and Hawkings equation with the obtained flow field information. Two distinct harmonic noise components—the blade passing frequency (BPF) and harmonics with a fundamental frequency that is much higher than the BPF—were identified in the predicted noise spectrum. The origin of the higher harmonic components was found to be related to vortex shedding from the rotating turbine. Based on this finding, the proposed low-noise design for Savonius wind turbines uses S-shaped blades. S-shaped blades were found to reduce the noise levels of Savonius wind turbines by up to 2.7 dB.