An integrated wind-photovoltaic-battery system with reduced power-electronic interface and fast control for grid-tied and off-grid applications

This paper proposes an integrated wind-photovoltaic-battery hybrid system that features a simple power management strategy, requires a lower number of power-electronic converters, and eliminates the need for dump loads. Thus, it is expected to offer a lower cost and higher efficiency, and to enable easier integration with distribution networks, as compared with a set of three stand-alone system. The power management strategy of the proposed hybrid system enables (1) rapid control of the wind and photovoltaic (PV) power outputs for tightly regulating the battery current, (2) off-grid operation with black-start capability, (3) grid-connected operation, and (4) safe transition from the grid-connected mode to the off-grid mode, and vice versa, without a need for communications with the host grid. Further, the proposed hybrid system is expected to have plug-and-play and power sharing capabilities and, therefore, suited for multi-generator remote electrification systems. The effectiveness of the proposed hybrid system is demonstrated through time-domain simulation studies in the PSCAD/EMTDC software environment.

►  An integrated hybrid system with reduced number of power converters is proposed.
►  A method for fast control of PV power output is proposed.
►  The proposed wind power control is faster than the conventional pitch-angle control.
►  A simple power management strategy coordinates the interface, PV, and wind units.
►  The proposed system operates in both grid-connected and islanded modes of operation.