Steady and rotating computational fluid dynamics simulations of a novel vertical axis wind turbine for small-scale power generation

A novel vertical axis wind turbine (VAWT) has been developed that consists of several asymmetric vertically-stacked stages. A computational investigation of the torque characteristics of the VAWT has been conducted using the commercial computational fluid dynamics (CFD) software CFdesign 2010. A validation study consisting of steady and rotating simulations was conducted using a Savonius rotor and good agreement was obtained with experimental data. Steady two-dimensional CFD simulations have demonstrated that the new VAWT has similar average static torque characteristics to existing Savonius rotors. Rotating three-dimensional CFD simulations were conducted at several tip speed ratios with a freestream speed of 6 m/s. The predicted dynamic torque generated by the rotor decays more rapidly with increasing tip speed ratio than the torque output of Savonius rotors due to its asymmetric design and the curvature of the outer rotor wall.

► Rotating computational fluid dynamics simulations were performed on a novel vertical axis wind turbine.
► A Savonius rotor was used for steady and rotating validation.
► The current design has a lower power coefficient than existing Savonius rotor designs.