Coordinated design of PSS and TCSC to mitigate interarea oscillations

• A method based on active power sensitivity approach is applied to find the best location of TCSC.
• Hankel singular value and RHP-zeros analyses are applied to select the best stabilizing input signal of POD-TCSC.
• A robust POD-TCSC is designed to damp out interarea oscillations. The results show the better performance of proposed controller over wide range of operating conditions.

Thyristor controlled series compensator (TCSC) as a promising series flexible AC transmission system (FACTS) device is generally used for controlling the real power flow in transmission lines. It can increase the system stability as the complementary functionality by minimizing the power oscillations. The effectiveness of TCSC in its primary and supplementary applications depends on the selection of its optimal location and defining a proper input signal. In this paper, a new method based on the active power sensitivity approach is applied to find the optimal location of TCSC. In addition, Hankel singular values (HSVs) and right half plane-zeros (RHP-zeros) analyses have been proposed to find the most appropriate stabilizing input signal for the supplementary functionality of TCSC to damp out the interarea modes of oscillation. Finally, the optimal design of power oscillation damper (POD) and simultaneous coordinated design of power system stabilizer (PSS) and POD are implemented separately in a large-scale power system. The tuning problem of POD-TCSC parameters as well as the coordinated POD-TCSC & PSS are converted to a multi-objective optimization problem and solved using particle swarm optimization (PSO) algorithm. The performance of the proposed method has been validated through eigenvalue analysis and nonlinear time domain simulation in a 16-machine 68-bus test system. The simulation results show a satisfactory robust performance with an excellent capability in damping of local and interarea power oscillations.