A functional foot type classification with cluster analysis based on plantar pressure distribution during jogging

The purpose of this study was to establish a reference dataset for peak pressures and pressure–time integrals during jogging, to compare this reference dataset with existing walking data and to develop a foot type classification, all based on plantar pressure data obtained from 215 healthy young adults. The subjects ran at 3.3 m s−1 over a 16.5 m long running track, with a built-in pressure platform mounted on top of a force platform. Peak pressures, regional impulses and relative regional impulses were measured. These variables were found to be reliable (all intra class correlation coefficients above 0.75) and, except for the heel areas, gender and asymmetry effects could be neglected. Highest peak pressures were found under the heel due to large impact forces during initial contact phase (ICP). In the forefoot, the highest peak pressure was found under the second metatarsal (64.2 ± 21.1 N cm−2). Compared to walking data, overall higher peak pressures and impulses and difference in hallux loading were found during barefoot jogging. Four pressure loading patterns were identified using a K-means cluster analysis, based on the relative regional impulses underneath the forefoot: medial M1 pattern, medial M2 pattern, central pattern and central–lateral pattern. These four pressure loading patterns could help in the functional interpretation of the foot behaviour during the stance phase in slow running.