Development of CAM system based on industrial robotic servo controller without using robot language

This paper describes the development of a robotic CAM system for an articulated industrial robot RV1A from the view point of robotic servo controller. It is defined here that the CAM system includes an important function which allows an industrial robot to move along cutter location data (CL data) consisting of position and orientation components. In addition, the developed CAM system has a high applicability to other industrial robots whose servo systems are technically opened to end-users. The developed robotic CAM system works as a straightforward interface between a general CAD/CAM and an industrial robot. At the present stage, the relationship between CAD/CAM and industrial robots is not well established compared to NC machine tools that are widely spread in manufacturing industries. The CAM systems for NC machine tools are already established, however, the CAM system for industrial robots has not been sufficiently considered and developed yet. A teaching pendant is generally used to obtain position and orientation data of the arm tip before an industrial robot works. Here, in order to enhance the relationship between a conventional CAD/CAM system and an industrial robot, a simple and straightforward CAM system without using any robot language is developed and implemented. The basic design of the robotic CAM system and the experimental results are presented in this paper.

► Important interface between a common CAD/CAM and an industrial robot is described.
► A robotic CAM system is proposed for an articulated industrial robot RV1A.
► The system is realized by integrating post-processor, servo controller and kinematics.
► The system does not require any robot language and teaching guide.
► The effectiveness is demonstrated by a trajectory following control along multi-axis CL data.