Victim retention for reducing cache misses in tiled chip multiprocessors

This paper presents CMP-VR (Chip-Multiprocessor with Victim Retention), an approach to improve cache performance by reducing the number of off-chip memory accesses. The objective of this approach is to retain the chosen victim cache blocks on the chip for the longest possible time. It may be possible that some sets of the CMPs last level cache (LLC) are heavily used, while certain others are not. In CMP-VR, some number of ways from every set are used as reserved storage. It allows a victim block from a heavily used set to be stored into the reserve space of another set. In this way the load of heavily used sets are distributed among the underused sets. This logically increases the associativity of the heavily used sets without increasing the actual associativity and size of the cache. Experimental evaluation using full-system simulation shows that CMP-VR has less off-chip miss-rate as compared to baseline Tiled CMP. Results are presented for different cache sizes and associativity for CMP-VR and baseline configuration. The best improvements obtained are 45.5% and 14% in terms of miss rate and cycles per instruction (CPI) respectively for a 4 MB, 4-way set associative LLC. Reduction in CPI and miss rate together guarantees performance improvement.