کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4912424 1428551 2016 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Geometrically nonlinear analysis of sandwich structures
ترجمه فارسی عنوان
تجزیه و تحلیل غیر خطی هندسی ساختارهای ساندویچ
کلمات کلیدی
ترجمه چکیده
در این کار، یک مدل عنصر محدود برای تجزیه و تحلیل هندسی غیر خطی ساختارهای پوسته ساندویچ، برای بررسی پاسخ استاتیک غیر خطی صفحات ساندویچ یا پوسته های منحنی که می تواند یک هسته سخت یا نرم وجود داشته باشد که در بین لایه های کششی سفت قرار دارد، گسترش می یابد. عنصر محدود با جمع آوری تمام لایه های عنصر از طریق ضخامت با استفاده از مفروضات خاص در تداوم جابجایی در رابط های بین لایه ها بدست می آید، اما اجازه می دهد رفتار های مختلف لایه ها را در نظر بگیریم. لایه های کششی سفت با استفاده از تئوری صفحه کلاسیک مدل سازی می شوند و هسته با استفاده از نظریه تغییر شکل سوم برشی ردیس مدل شده است. با استفاده از روش تکراری-تکراری نیوتن-رافسون، مسیر توازن به دست می آید و در صورت وقوع ضربه محکم و ناگهانی، روش خودکار قوس طولی برای پیگیری توزیع جابجایی کامل بار استفاده می شود. این مدل عنصر ساده و سریع یک عنصر مستطیلی و پوسته مثلثی غیرقابل انطباق با 24 درجه آزادی برای جابجاییهای عمومی است. این معیار در راه حل برخی نمونه های صفحه ای پوشیده شده است و نتایج ارائه شده و با مدل های جایگزین عددی و تجربی ارائه می شود.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
In this work a finite element model is extended for geometrically nonlinear analysis of sandwich plate-shell structures, to study the nonlinear static response of sandwich plates or curved shells which can have a hard or soft core sandwiched between stiff elastic layers. The finite element is obtained by assembling all element-layers through the thickness using specific assumptions on the displacement continuity at the interfaces between layers, but allowing for different behavior of the layers. The stiff elastic layers are modeled using the classic plate theory and the core is modeled using the Reddy's third order shear deformation theory. Using the Newton-Raphson incremental-iterative method, the equilibrium path is obtained, and in case of snap-through occurrence the automatic arc-length method is used to track the full load displacement distribution. This simple and fast element model is a non-conforming triangular flat plate/shell element with 24 degrees of freedom for the generalized displacements. It is benchmarked in the solution of some illustrative plate-shell examples and the results are presented and discussed with numerical and experimental alternative models.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 156, 15 November 2016, Pages 135-144
نویسندگان
, , , , ,