کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4917857 1428546 2017 42 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Generation of filament-winding paths for complex axisymmetric shapes based on the principal stress field
ترجمه فارسی عنوان
تولید مسیرهای سیم پیچی رشته ای برای اشکال مختلط پیچیده بر اساس زمینه استرس اصلی
ترجمه چکیده
پیچاندن فیبر فرایندی است که در آن فیبرهای شیشه ای یا کربن در اطراف یک هسته به یکدیگر متصل می شوند تا ساختارهای تقویت شده فیبر شکل خاصی را شکل دهند. استحکام بخشی تقویت شده فیبر حداکثر می شود زمانی که جهت فیبر با جهت اصلی اصلی استرس این بخش هماهنگ باشد. مطالعات قبلی به روش هایی برای محاسبه مسیرهای پیچشی حداکثر قدرت با تنظیم شکل های هسته پرداختند. با این حال، این روش ها برای اشکال پیش تعیین شده مناسب نیستند که برای برآورده شدن برخی از نیازهای خاص تایید شده است. این مطالعه یک روش برای تولید مسیرهای سیم پیچ رشته با استفاده از زمینه های استرس اصلی بخش تولید می کند. در این روش، مسیرهای پیچشی متغیر به عنوان نزدیکترین جهت اصلی جهت اصلی تنش محصول محاسبه می شوند تا مسیر های سیم پیچ رشته ای که بتوانند حداکثر بار بدون لغزش را پشتیبانی کنند، محاسبه شوند. روش پیشنهادی مزیت آن این است که پیچیدگی شکل ناهمواری محوری را محدود نمی کند.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Filament winding is a process in which glass or carbon fibers are wound around a mandrel to form fiber-reinforced structures of a desired shape. The strength of the fiber-reinforced part is maximized when the fiber direction coincides with the direction of the major principal stress of the part. Previous studies addressed methods to calculate the winding paths of maximum strength by adjusting the mandrel shapes. However, these methods are not appropriate for predetermined shapes that are fixed to satisfy certain special requirements. This study proposes a method to generate filament-winding paths using the principal stress fields of the part to be manufactured. In this method, variable winding directions as close as possible to the major principal stress directions of the product are calculated to generate filament-winding paths that can support the maximum load without slippage. The proposed method had the advantage of not being limited by the complexity of axisymmetric mandrel shape.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 161, 1 February 2017, Pages 330-339
نویسندگان
, , , ,