کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4923290 1430694 2017 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Residual clamping force of bolt connections caused by sectional damage of nuts
ترجمه فارسی عنوان
نیروی محصور باقی مانده اتصالات پیچ ناشی از آسیب های مقطعی از آجیل
کلمات کلیدی
اتصال پیچ مهره، آسیب بخش نیروی گیره باقی مانده، خوردگی،
ترجمه چکیده
برای در نظر گرفتن آسیب های مقطعی اتصالات پیچ از طریق آسیب خوردگی برای نگهداری سازه های فولادی، نیروی گیره باقی مانده اتصالات پیچ به صورت کمی اندازه گیری می شود بسته به آسیب های مقطعی بخش های مهره ای که از برش مصنوعی در این مطالعه توسعه یافته است. بدین ترتیب نمونه های اتصال اصطکاک با استفاده از اتصال های پیچشی با مقاومت بالا ساخته می شوند و قطعات مهره ای در اتصالات پیچ با استفاده از ابزار برش دستی دستی مصنوعی می شوند. برای اندازه گیری تغییر در نیروی بست از اتصالات پیچ، تغییر پس از اندازه گیری شده در پیچ با استفاده از یک سویه فشار بعد از بستن و ایجاد آسیب بخش مقطعی مصنوعی به مهره مورد بررسی قرار گرفت. اندازه بندی و شکل و گستردگی ضایعات بخشی پارامترهای مورد نظر در این مطالعه بود. وزن مهره پس از ایجاد آسیب بخش مصنوعی به مهره برای محاسبه آسیب های مقطعی ناشی از مهره اندازه گیری شد. از نتایج آزمون ها برای اتصال پیچ با آجیل آسیب دیده مقطعی مصنوعی. نیروهای محکم باقی مانده اتصال اتصالات به علت مقاومت کششی اتصالات پیچ، تحت تأثیر آسیب ناشی از مهره، کاهش یافته است. در مورد آسیب های مقطعی بالایی در بخش مهره، تغییرات نسبتا بالا در نیروی بستگی در مجموعه های آزمایش شده از آجیل یافت شد. از تحلیل رگرسیون نیروی گیره باقی مانده اتصالات پیچ، معادلات برآورد برای تغییر در نیروی گیره باقی مانده از آسیب های مقطعی از مهره به دست آمده با استفاده از حجم آسیب دیده مهره و قطر بخش مهره باقی مانده برای تعمیر و نگهداری اتصالات پیچ در سازه های فولادی.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
To consider sectional damage of bolt connections by corrosion damage for the maintenance of steel structures, the residual clamping force of bolt connections was quantitatively examined depending on sectional damage of the nut sections developed from artificial cutting in this study. Thus, friction connection specimens using high-strength bolt connections were fabricated, and the nut sections in the bolt connections were artificially damaged using handheld cutting tools. To measure the change in the clamping force of the bolt connections, the change in strain measured in the bolt using a strain gage was examined after clamping and inducing artificial sectional damage to the nut. The bolt size and the shape and extent of sectional damage were the parameters considered in this study. The weight of the nut was measured after inducing artificial sectional damage to nut to calculate induced sectional damage of nut. From tests results for bolt connection with artificial sectional damaged nuts. The residual clamping forces of the bolt connections were decreased because of the reduced tensile resistance of the bolt connections, affected by the sectional damage of the nut. In case of high sectional damage in the nut section, a relatively higher change in the clamping force was found in the tested series of nuts. From regression analysis of the residual clamping force of the bolt connections, the estimation equations for the change in the residual clamping force developed from sectional damage of the nut were formulated using the damaged volume of the nut and diameter of the remaining nut section for the maintenance of bolt connections in steel structures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Constructional Steel Research - Volume 136, September 2017, Pages 204-214
نویسندگان
, , , , ,