کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4923314 | 1430692 | 2017 | 18 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Full slenderness range DSM approach for stainless steel hollow cross-section columns and beam-columns
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Full slenderness range DSM approach for stainless steel hollow cross-section columns and beam-columns Full slenderness range DSM approach for stainless steel hollow cross-section columns and beam-columns](/preview/png/4923314.png)
چکیده انگلیسی
The behaviour of austenitic, ferritic and duplex stainless steel Rectangular and Square Hollow Section members subjected to compression and combined loading is investigated in this paper. A full slenderness range Direct Strength Method (DSM) approach is proposed based on experimental results and numerical strengths obtained from FE parametric studies. The method accounts for local buckling effects and enhanced material properties are also incorporated for those members stable enough to allow partial yielding of the cross-sections. The proposed method is based on strength curves previously provided for cross-sections although additional limitations have been adopted. The DSM approach for columns is based on existing buckling curves and provides accurate resistance predictions for slender and stocky cross-sections. The proposed DSM approach for beam-columns also improves capacity predictions for stocky and slender cross-sections obtained from the traditional methods for different bending moment distributions. This is attributed to the fact that the beam-column behaviour is directly calculated with a unique strength curve, considering the member and section slendernesses based on the elastic instabilities of the section subjected to the actual stress distribution instead of calculating the compressive and flexural strengths independently and combining these through an interaction equation, as is the traditional uncoupled approach. Finally, a reliability study of the full slenderness range DSM approach is presented to determine resistance factors for the different stainless steel grades columns and beam-columns.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Constructional Steel Research - Volume 138, November 2017, Pages 246-263
Journal: Journal of Constructional Steel Research - Volume 138, November 2017, Pages 246-263
نویسندگان
I. Arrayago, K.J.R. Rasmussen, E. Real,