کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4925128 | 1431269 | 2017 | 21 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Proposal for a direct-method for stress measurement using an X-ray area detector
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Proposal for a direct-method for stress measurement using an X-ray area detector Proposal for a direct-method for stress measurement using an X-ray area detector](/preview/png/4925128.png)
چکیده انگلیسی
In this study, I propose a new method for X-ray stress measurement using an area detector. Its method is called the direct-method”. The diffraction angles are measured with the area detector and the normal incident X-ray beam, and then the stresses are optimized by a simplex method. To examine effectiveness of the direct-method, I measured the residual stresses caused by water-jet peening. The stresses obtained were close to those obtained by the other method. It is discussed that precision of a detector center is important in usage of the area detector. In the case of the normal incident X-ray beam, the shape of the diffraction ring is an ellipse and has point symmetry at the origin. Using this property, the center of the area detector can be corrected. Further, the direct-method was applied to measuring the residual stresses coming from the grinding process. After correcting the center of the diffraction ring, the stresses which were optimized by the simplex method corresponded to those measured by the sin2Ï method. In addition, the direct-method was extended to a cosα method.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: NDT & E International - Volume 92, December 2017, Pages 104-110
Journal: NDT & E International - Volume 92, December 2017, Pages 104-110
نویسندگان
Kenji Suzuki,