کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4926144 | 1431592 | 2017 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Numerical study of effect of injection and ignition timings on combustion and unregulated emissions of DISI methanol engine during cold start
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Numerical study of effect of injection and ignition timings on combustion and unregulated emissions of DISI methanol engine during cold start Numerical study of effect of injection and ignition timings on combustion and unregulated emissions of DISI methanol engine during cold start](/preview/png/4926144.png)
چکیده انگلیسی
Numerical simulations were performed for the effect of injection and ignition timings on combustion and the generation of formaldehyde and unburned methanol emissions in the cylinder of a stratified charge direct injection spark ignition (DISI) methanol engine during cold start using AVL-fire, coupling the methanol chemical and kinetic reaction mechanisms. A non-uniform spray-line distribution nozzle was used to form stratified charge methanol-air mixtures during cold start. The simulation shows that injection and ignition timings have a significant effect on the concentration distribution of the methanol-air mixture, and hence the affect combustion and generation of formaldehyde and unburned methanol emissions. Optimized injection and ignition timings form an ideal stratified charge distribution. Formaldehyde and unburned methanol emissions decrease with retarding of the injection timing, but increase with retarding of the ignition timing. Formaldehyde and unburned methanol emissions at injection timing 41°crank angle before top dead center (CABTDC) were 48% and 82% higher than for 57°CABTDC, and those at ignition timing 8°CABTDC were 125% and 900% higher than for 20°CABTDC, respectively. Optimal injection and ignition timings provide the best compromise between the maximum cylinder pressure, maximum heat release rate, maximum cylinder temperature, and formaldehyde and unburned methanol emissions. Injection timing 45°CABTDC and ignition timing 14°CABTDC obtained the best compromise on cold start performance.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Renewable Energy - Volume 112, November 2017, Pages 457-465
Journal: Renewable Energy - Volume 112, November 2017, Pages 457-465
نویسندگان
Changming Gong, Jiajun Liu, Legao Peng, Fenghua Liu,