GPRS/EGPRS standards applied to DTC of a DFIG using fuzzy - PI controllers

Wireless communication applications for smart grids are a novel trend in renewable energy solutions. However, the problem of interference in the channel must be considered. The GPRS/EGPRS standards could be used to transmit the reference signals to the wind power system. A Direct Torque Control technique for a DFIG was proposed to testing the reactive power and the electromagnetic torque step changes according to the grid conditions using the wireless references signals. A Fuzzy-tuned PI controller was included to optimize the calculation of its proportional and the integral gains. Simulations were done in Matlab/Simulink to evaluate the behavior of the control technique via GPRS-CS1, EGPRS-MCS1 and EGPRS-MCS5 standards. The total harmonic distortion for the stator currents injected to the grid is also evaluated.