Removing rubidium using potassium cobalt hexacyanoferrate in the membrane adsorption hybrid system

Highly-priced rubidium (Rb) can be effectively extracted from seawater using potassium cobalt hexacyanoferrate (KCoFC) and ammonium molybdophosphate (AMP) adsorbents in the membrane adsorption hybrid system (MAHS). KCoFC (<0.075 mm), KCoFC (0.075-0.15 mm), and AMP (<0.075 mm) had Langmuir adsorption capacities of 145, 113, and 77 mg/g at pH 6.5-7.5, respectively. When KCoFC (<0.075 mm) at a dose of 0.2 g/L was initially added to 4 L of a solution containing 5 mg Rb/L in the MAHS and 25% of the initial dose was repeatedly added every hour, the amount of Rb removed remained steady at 90-96% for the experiment's 26 h duration. The removal of Rb by AMP under similar conditions was 80-82%. The cumulative Rb removed by KCoFC (<0.075 mm) in MAHS was only 33% reduced in the presence of high concentrations of other cations in synthetic seawater compared to that in solution containing only Rb. Approximately 30% of the adsorbed Rb was desorbed using 1 M KCl. When the desorbed solution was passed through a column containing resorcinol formaldehyde (RF), 35% of the Rb in the desorbed solution was adsorbed on RF. Furthermore 50% of the Rb adsorbed on RF was recovered by 1 M HCl leaching of the column. This sequence of concentration and separation of Rb in the presence of other cations in synthetic seawater is an efficient method for recovering pure Rb from real seawater and seawater reverse osmosis brine.