کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4998284 1460064 2017 15 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
General design methodology for reactive liquid-liquid extraction: Application to dicarboxylic acid recovery in fermentation broth
ترجمه فارسی عنوان
روش طراحی عمومی برای استخراج مایع واکنش پذیر: کاربرد برای بازیابی اسید دیاربوکسیلیک در تخمیر بوجان
کلمات کلیدی
استخراج مایع مایع واکنشی نمودار مایع مایع، طراحی فرآیند، سنتز فرایند، تعادل فیزیکی و شیمیایی، سوکسینیک اسید، تخمیر سوپ،
ترجمه چکیده
در این مقاله یک روش طراحی کلی برای استخراج مایع مایع واکنشی معرفی شده است. این شامل سه مرحله مختلف است: تجزیه و تحلیل امکان سنجی، تعیین پیش طراحی و اعتبارسنجی شبیه سازی. این مقاله در مرحله اول و دوم قرار دارد. این روش به مشخصات طراحی واحدها از اطلاعات مربوط به رفتار فیزیکی و شیمیایی سیستم مورد مطالعه منجر می شود و از معادلات تعادل و تعادل مواد استفاده می کند. نتایج این روش یک نقطه شروع خوبی برای یک مطالعه بهینه سازی یا یک فرآیند محاسبه سرمایه گذاری است. این روش برای مطالعات موردی مختلف مورد استفاده قرار گرفته است: دو استراتژی مختلف استخراج و چندین حلال برای بازیابی اسید بنچنیک در فرآوری بوجان.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی تکنولوژی و شیمی فرآیندی
چکیده انگلیسی
A general design methodology for reactive liquid-liquid extraction is introduced in this paper. It is composed of three different steps: feasibility analysis, pre-design determination and simulation validation. This paper is focused on the first and the second step. This methodology leads to the design specifications of the units from the information concerning the physico-chemical behaviour of the studied system, exploiting the equilibrium and material balance equations. The results of this methodology are a good starting point for an optimization study or for an investment calculation process. This methodology has been applied to different case studies: two different strategies of extraction and several solvents to recover succinic acid in fermentation broth.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemical Engineering and Processing: Process Intensification - Volume 113, March 2017, Pages 20-34
نویسندگان
, , , , ,