Modeling of the EHD effects on hydrodynamics and heat transfer within a flat miniature heat pipe including axial capillary grooves

A numerical model for an electrohydrodynamic (EHD) grooved Flat Miniature Heat Pipe (FMHP) is developed. Two microchannel shapes are considered as axial capillary structures: square and triangle grooves. For both groove shapes, the electric field affects the liquid-vapor radius of curvature which decreases in the condenser and increases in the evaporator under the action of the electric field. The liquid and vapor velocities are also affected by the EHD effects. The electric field effects on the velocities depend on the FMHP zone. It is also demonstrated that the electric field increases the vapor pressure drop; however, it decreases the liquid pressure drop. The liquid-wall and vapor-wall viscous forces as well as the shear liquid-vapor forces are affected by the electric field. The analysis of the electric forces shows that the dielectrophoretic forces which act on the liquid-vapor interface are predominant and their order of magnitude is much higher than the Coulomb forces. Finally, it is also demonstrated that the capillary limit increases with the electric field for both groove shapes.