کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5007238 | 1461605 | 2017 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Phase evolution characteristics and corrosion behavior of FeCoCrAlCu-X0.5 coatings on cp Cu by laser high-entropy alloying
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی برق و الکترونیک
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Phase evolution characteristics and corrosion behavior of FeCoCrAlCu-X0.5 coatings on cp Cu by laser high-entropy alloying Phase evolution characteristics and corrosion behavior of FeCoCrAlCu-X0.5 coatings on cp Cu by laser high-entropy alloying](/preview/png/5007238.png)
چکیده انگلیسی
Fe-Co-Cr-Al-X0.5 (X = Si, Mo or Ti) powder systems with close-to-equiatomic ratios were mixed and laser surface alloyed onto cp Cu substrates, aiming at producing FeCoCrAlCu-X0.5 coatings by reaction synthesis of Cu with Fe-Co-Cr-Al-X0.5 powder. With optimized processing parameters, the laser high-entropy alloying (LHEA) coatings free of cracks and pores were achieved. X-ray diffractometry confirmed that the crystal structures of FeCoCrAlCu-X0.5 LHEA coatings evolved from two-phase fcc + bcc structures for X = Si to three-phase fcc + bcc + intermetallic structures for X = Mo and X = Ti. The phase formation analysis indicated that besides Ω and δ parameters, solidification temperature Ts must be considered when predicating on the formation of simple solid solution structure in high entropy alloys, instead of melting point of the alloy as suggested previously. The alloy for X = Si exhibited the best corrosion resistance among the tested specimens based on corrosion rate, which was two orders of magnitude lower than that of the substrate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optics & Laser Technology - Volume 94, 1 September 2017, Pages 68-71
Journal: Optics & Laser Technology - Volume 94, 1 September 2017, Pages 68-71
نویسندگان
C.L. Wu, S. Zhang, C.H. Zhang, J. Chen, S.Y. Dong,