کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5014546 1463302 2017 27 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Flaw sensitivity in rate-sensitive high strength alloys: An assessment and future research directions
ترجمه فارسی عنوان
حساسیت نقص در آلیاژهای با مقاومت بالا حساس به سرعت: ارزیابی و جهت گیری های آینده
کلمات کلیدی
چاقو، کرک کوتاه، حساسیت نرخ، اندازه نقص انتقال،
ترجمه چکیده
استحکام کششی آلیاژهای فلزی ممکن است به وجود ترکهای کوتاه، به ویژه در حالت خرد شده (مانند جداسازی فسفر یا گوگرد به مرزهای دانه در یک فولاد با مقاومت بالا) حساس باشد. شواهد تجربی نشان می دهد که انشعاب همراه با پلاستیسیته می تواند زمانی اتفاق بیفتد که تنش بخش خالص بر اساس میزان مقاومت است. اگر جامد به شدت فشار قلیایی، اما بدون حساسیت باشد، پس هیچ شکاف نمی تواند پیش بینی شود زیرا استرس کششی نوک تیز نخواهد رسید ارزش محلی قطعه. در مطالعه حاضر، نقش حساسیت سرعت با قرار دادن یک منطقه تسریع کششی در نوک یک لبه در یک جامد ویسکوزپلاستیک، و کرک تحت فشار کششی قرار گرفته است. به این ترتیب، شروع و رشد ترکیبی از ضعف های کوتاه در حضور انعطاف پذیری انبوه پیش بینی می شود. منحنی مقاومت رشد ترک برای نقص های طولانی نیز تعیین می شود. تاثیرات پیش بینی ها برای ضعف هیدروژن بحث می شود و اهمیت اثرات نرخ در بالا بردن سطح استرس در مجاورت نوک کرک اندازه گیری می شود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی مهندسی انرژی و فناوری های برق
چکیده انگلیسی
The tensile strength of metallic alloys may be sensitive to the presence of short cracks, particularly in the embrittled state (such as phosphorous or sulphur segregation to the grain boundaries in a high strength steel). Experimental evidence reveals that cleavage accompanied by plasticity can occur when the net section stress is on the order of the yield strength. If the solid were mildly strain hardening but rate-insensitive, then no cleavage would be predicted as the crack tip tensile stress would not attain the local cleavage value. In the present study, the role of rate sensitivity is assessed by placing a tensile cohesive zone at the tip of an edge crack within a visco-plastic solid, and the crack is subjected to remote tension. Thereby, crack initiation and growth is predicted from short flaws in the presence of bulk plasticity. The crack growth resistance curve for long flaws is also determined. Implications of the predictions are discussed for hydrogen embrittlement, and the significance of rate effects in elevating the stress level adjacent to the crack tip is quantified.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Extreme Mechanics Letters - Volume 10, January 2017, Pages 70-77
نویسندگان
, , ,