کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5018063 1466722 2017 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Residual stress distributions and their influence on post-manufacturing deformation of injection-molded plastic parts
ترجمه فارسی عنوان
توزیع استرس های باقی مانده و تأثیر آنها بر تغییرات پس از تولید قطعات پلاستیکی قالب تزریق شده
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
Post-manufacturing thermal exposure of injection-molded parts may result in unexpected permanent deformation. In this study, the mechanism of the post-manufacturing thermal deformation of injection-molded parts is investigated. A simple stress lattice part was used, and injection-molding experiments were carried out to characterize the deformation that occurred in post-manufacturing thermal cycling. The stress lattice part was chosen so that the thermal stress could be investigated with different cooling rates in the same part. The stress lattice parts were thermally cycled using a thermal chamber. A series of computer-aided engineering (CAE) analyses, including injection-molding analysis and finite element analysis (FEA), were performed to describe the deformation following the thermal cycle. The results of these analyses were in good agreement with the experimental results, and revealed that the residual stress formed during the injection molding process was the primary cause of the permanent deformation following the post-manufacturing thermal cycling.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 245, July 2017, Pages 215-226
نویسندگان
, ,