کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5018772 1467723 2017 21 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Numerical approach for determination of rough-cutting machine-tool settings for fixed-setting face-milled spiral bevel gears
ترجمه فارسی عنوان
رویکرد عددی برای تعیین دستگاه برش برای تنظیم ثابت چرخ دنده های مارپیچی چهره ای خرد شده
کلمات کلیدی
هندسه دنده، چرخ دنده های مارپیچی چهره ای خرد شده، خرد کردن، بهینه سازی محدود،
ترجمه چکیده
چرخ دنده های دنده ای اسپیرال ساخته شده با استفاده از روش به اصطلاح پنج برش طراحی شده اند برای دستیابی به بهترین شرایط مش و تماس، از آنجایی که سطوح دندانه ای محدب و مقعر مستقیما تولید می شوند، امکان دستیابی به الگوهای تماس بهینه و عملکرد مطلوب خطاهای انتقال برای هر دو طرف سطوح دنده دنده، و کاهش آن با نویز و ارتعاش و افزایش استقامت چرخ دنده. به عنوان بخشی از فرآیند تولید، سرخ کردن هر دو طرف سطوح دندانه دندانه دار مورد نیاز است. در این مقاله، یک رویکرد عددی جدید برای تعیین تنظیمات ابزار ماشینکاری برای خرد کردن چرخ دنده با استفاده از یک تیغه برش چاقو پیشنهاد می شود. هدف اصلی از روش پیشنهادی کاهش زمان چرخه تولید و حداکثر برداشتن مواد در طول عملیات برش خسته کننده است، بدون آسیب رساندن به سطوح به پایان رسید. این روش براساس حل یک مشکل بهینه سازی محدود شده است. یک مثال عددی کاربرد کاربرد روش عددی توسعه یافته را نشان می دهد. نتایج عددی به دست آمده بیانگر این است که هندسه های قابل قبول برش ناپذیر ممکن است در طی اولین تکرارها به عنوان راه حل های تجاری حل شود.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
Spiral bevel gear drives manufactured by the so-called five-cut method are designed to achieve the best conditions of meshing and contact since convex and concave pinion tooth surfaces are generated independently, allowing the achievement of optimized contact patterns and favorable functions of transmission errors for both flanks of gear tooth surfaces, and reducing with it noise and vibration and increasing the endurance of the gear drive. As part of the process of manufacturing, roughing of both flanks of the pinion tooth surfaces is needed. In this paper, a novel numerical approach for determination of machine-tool settings for roughing of the pinion by using a spread-blade face-milling cutter is proposed. The main purpose of the proposed procedure is the reduction of the manufacturing cycle time and maximizing the material cut during the rough-cutting operation, without damaging the to-be-finished surfaces. The procedure is based on the resolution of a constrained optimization problem. A numerical example shows the applicability of the developed numerical approach. The obtained numerical results disclose that acceptable rough-cut geometries are possible to be managed during the first iterations as trade-off solutions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanism and Machine Theory - Volume 112, June 2017, Pages 22-42
نویسندگان
, , ,