An integrated method for measurement of diamond tools based on AFM

The measurement and evaluation technology of high precision diamond tools is critically important for supporting the ultra-precision machining. In practical cutting process, the edge profile quality of the diamond tool, including sharpness, micro defects, roughness and tip arc waviness, greatly affects the cutting quality. It is very difficult to measure and evaluate the diamond tool edge profile due to the high precision of tool edge profile and complexity of various measurement parameters. In this paper, an integrated method for measurement and characterization of diamond tools is proposed, which is based on an Atomic Force Microscope (AFM) module. Multiple technical indexes of diamond tools are obtained and validated based on the presented research and cutting experiments, and the evaluation model for each technical index is also proposed. The integrated measurement equipment, including an AFM, precision adjustment device and aerostatic bearings, has been established based on the accuracy requirement of measurement parameters. The edge sharpness, micro defects, surface roughness and tip arc waviness have been obtained based on the evaluation model and experimental data. The experimental results show that the measurement accuracy meets the requirements of the comprehensive evaluation of the diamond tool edge profile. The research work will also contribute to the development of ultra-precision machine.