کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5019109 | 1467839 | 2017 | 28 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Variable speed compensation method of errors of probes for CNC machine tools
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Variable speed compensation method of errors of probes for CNC machine tools Variable speed compensation method of errors of probes for CNC machine tools](/preview/png/5019109.png)
چکیده انگلیسی
Systematic errors of kinematic touch-trigger probes for CNC machine tools may exceed errors of the machine tool itself. As a result, the machining accuracy is strongly dependent on the probe's accuracy. Numerical correction of probes' systematic errors can be used. However, it requires executing calculations by the CNC machine tool controller. To avoid this troublesome requirement, a new method of errors compensation is proposed. In this approach, a modification of the probe's pre-travel in a given direction is achieved by modification of measurement speed in this direction. Because all measurement speeds can be calculated offline, the controller does not have to do any calculations. The proposed method has been tested for sample kinematic probes and the error reduction was at least 10-fold.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Precision Engineering - Volume 49, July 2017, Pages 316-321
Journal: Precision Engineering - Volume 49, July 2017, Pages 316-321
نویسندگان
Adam Wozniak, MichaÅ Jankowski,