کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5021211 | 1469363 | 2017 | 38 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A new process control method for microwave curing of carbon fibre reinforced composites in aerospace applications
ترجمه فارسی عنوان
یک روش کنترل فرآیند جدید برای ترمیم مایکروویو از کامپوزیت های تقویت شده فیبر کربن در کاربردهای هوا فضا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
برای ساخت کامپوزیت های تقویت شده فیبر کربن استفاده شده در صنایع هوا فضا، تکنولوژی های تولید مایکروویو بهتر از تکنولوژی های سنتی حرارتی می باشند. با این حال، چرخه توصیه شده سازنده توصیه شده در سوزاندن اتوکلاو سنتی به طور مستقیم به فن آوری های فعلی مایکروویو درمان بدون اعتبار کامل به تصویب رسید. در اینجا، یک روش جدید گرمایش و خنک کننده چرخه ای برای کنترل فرآیند مایکروویو فرایند کامپوزیت با تحلیل مکانیزم های هدایت گرما، تولید استرس و سینتیک خنثی ارائه می شود. نتایج آزمایش انجام شده نشان دهنده کاهش قابل ملاحظه ای در فشار باقیمانده، غلطک، زمان کل زمان پخت و مصرف انرژی در مقایسه با هر دو روش سنتی حرارتی و تکنولوژی های فعلی مایکروویو می باشد. خواص مکانیکی نمونه هایی که با فرآیند جدید درمان می شوند با دستگاه های اتوکلاو مقایسه می شوند.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
For the fabrication of carbon fibre reinforced composites used in aerospace industry, microwave curing technologies are more effective than traditional thermal curing technologies. However, the manufacturer's recommended cure cycles used in traditional autoclave curing are directly adopted into current microwave curing technologies without thorough validation. Here, a new cyclic heating and cooling methodology for microwave curing process control of composite is proposed by analyzing mechanisms of heat conduction, stress generation and curing kinetics. The results of the experiment carried out show significant reductions in residual strain, warpage, total curing time and energy consumption, compared with both traditional thermal curing and current microwave curing technologies. The mechanical properties of samples cured by the new process are compared with the autoclave cured ones.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 122, 1 August 2017, Pages 61-70
Journal: Composites Part B: Engineering - Volume 122, 1 August 2017, Pages 61-70
نویسندگان
Nanya Li, Yingguang Li, John Jelonnek, Guido Link, James Gao,