کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5021420 1469373 2017 27 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Liquefaction of lignin in hot-compressed water to phenolic feedstock for the synthesis of phenol-formaldehyde resins
ترجمه فارسی عنوان
روان سازی لیگنین در آب گرم فشرده به مواد فنلیک برای سنتز رزین فنل فرمالدئید
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی
The corn stalk lignin was liquefied in hot-compressed water without any other additives to obtain the degraded liquids (DL) with liquefaction yields of 45.9-61.4 wt%, under 3.4 MPa and 260 °C. The degradation liquids, mainly composed of small molecular phenols as high as 84.6 wt%, were put to use as substitutes for phenol to modify phenol-formaldehyde resin. The degradation liquids modified phenol-formaldehyde resins (DLPFs) possessed the highest adhesive strength (1.32 ± 0.10 MPa) than the lignin-phenol-formaldehyde resin (LPF, 0.72 ± 0.20 MPa) and typical phenol-formaldehyde resin (PF, 0.77 ± 0.26 MPa). The free formaldehyde contents of the DLPFs were all lower than the requirement of the corresponding standard (≤0.3 wt%), even when 60% of phenol was replaced by DL (0.232 wt%). The curing behavior analysis showed that the introducing of DL notably decreased the curing activation energy. The results demonstrated that the DLs were very suitable substitution for phenol in preparation of DLPFs. The adhesive strengths of DLPFs were considerably improved compared with typical PF. The thermal curing kinetic analysis revealed that the values of activation energy were decreased obviously with the introduction of DL.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 112, 1 March 2017, Pages 8-14
نویسندگان
, , , , , , , , ,