کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5021468 1469369 2017 22 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Mechanical characterization of the elastoplastic response of asphalt felt paper
ترجمه فارسی عنوان
مشخصات مکانیکی واکنش الاستوپلاستیک از کاغذ آستر آسفالت
کلمات کلیدی
ترجمه چکیده
تجزیه و تحلیل عددی و تجربی از پاسخ مکانیکی کاغذ آفتابگردان ارائه شده است. این مواد به عنوان یک مانع رطوبت در ساختمان های ساخته شده از مواد سبک به طور گسترده ای استفاده می شود. برای اطمینان از چنین عملکردی، لازم است که این مواد در طول نصب و بهره برداری از آن پاره نشود و به همین دلیل مهم است که جزئیات مکانیکی آن را بدانیم. برای این منظور، آزمونهای کششی و برآمدگی انجام شد و به ترتیب برای توصیف پاسخ های مواد الاستوپلاستیکی مستقل از هواپیما در داخل هواپیما و خارج از هوا که مشخصا به شدت وابسته به جهت الیاف سلولز بود، مورد استفاده قرار گرفت. مدل سازنده، خصوصیات غیر انحرافی از ماده را در نظر می گیرد که عملکرد هیل 48 را تعریف می کند تا سطح عملکرد و جریان جریان غیر پلاستیکی را تعریف کند تا به درستی پیش بینی رفتار مکانیکی برای محدوده تغییر شکل کامل هر دو تست باشد. این روش برای مطابقت با پارامترهای مؤلفه از طریق روش پیشنهادی تکراری عددی- تجربی انجام می شود. نتایج به دست آمده نشان می دهد که پاسخ مادی را در هر دو آزمایش تست کشش و بقای مناسب نشان می دهد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی
A numerical and experimental analysis of the mechanical response of asphalt felt paper is presented. This material is widely used as a moisture barrier in buildings made of light materials. To ensure such function, it is necessary for this material not to be torn during its installation and operation and, for this reason, it is important to know its mechanical behavior in detail. To that end, tensile and bulge tests were carried out and respectively used to characterize the in-plane and out-of-plane rate-independent elastoplastic material responses which were observed to be strongly dependent on the directions of the cellulose fibers. The constitutive model considers the anisotropic character of the material assuming the Hill-48 function to define both the yield surface and the non-associated plastic flow rule to properly predict the mechanical behavior for the full deformation ranges of both tests. The procedure to fit the material parameters is carried out via a proposed iterative numerical-experimental methodology. The obtained results are found to adequately describe the material response in both the tensile and bulge tests.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 116, 1 May 2017, Pages 113-121
نویسندگان
, , , ,