کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5022264 | 1469484 | 2017 | 23 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Improvement of rigidity for rubber-toughened polypropylene via localization of carbon nanotubes
ترجمه فارسی عنوان
بهبود سختی برای پلیپروپیلن سخت لاستیک از طریق محلی سازی نانولوله های کربنی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نانولوله های کربنی، کامپوزیت پلیمر ماتریس، ویژگی های مکانیکی، مخلوط کردن،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
A methodology for controlling the localization of multi-walled carbon nanotubes (MWCNTs) was studied using an immiscible polymer blend composed of isotactic polypropylene (PP) and ethylene-co-propylene rubber (EPR). We found that the MWCNTs were localized in EPR domains within the composite, which was prepared at 280 °C. EPR molecules bonded to the MWCNT surface are responsible for the localization in EPR. Conversely, MWCNTs preferentially resided in the matrix when the composite was prepared at 190 °C along with nitrogen gas purging. Because of the selective localization of the MWCNTs in the matrix, the composite obtained via mixing at the lower temperature exhibited a higher Young's modulus and yield strength. These findings demonstrate that mixing conditions greatly affect the MWCNT distribution and thus the mechanical properties of PP/EPR blends.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Science and Technology - Volume 141, 22 March 2017, Pages 106-112
Journal: Composites Science and Technology - Volume 141, 22 March 2017, Pages 106-112
نویسندگان
Rujirek Wiwattananukul, Bowen Fan, Masayuki Yamaguchi,