کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5026313 | 1369864 | 2016 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Drilling study on Cu, Mo, W and Ti by using SBS pulse compressed steep leading edge hundred picoseconds laser
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
For the first time, studies on stimulated Brillouin scattering (SBS) pulse compression based hundred picoseconds laser processing of Cu, Mo, W and Ti have been experimentally investigated. Different from other laser output, the pulse width of the SBS pulse compressed laser is about 450Â ps with a steep rising edge. The number of pulses to drill through the four kinds of metals with thicknesses 1Â mm have been measured. The diameters, depths and morphologies of the drilled craters were observed with optical microscope and scanning electron microscope (SEM). Different micro structures on the four metals are obtained in our experiment. Our research provides a potential application of high energy hundred picoseconds lasers in the future.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optik - International Journal for Light and Electron Optics - Volume 127, Issue 23, December 2016, Pages 11156-11160
Journal: Optik - International Journal for Light and Electron Optics - Volume 127, Issue 23, December 2016, Pages 11156-11160
نویسندگان
Zhenxu Bai, Can Cui, Zhaohong Liu, Hang Yuan, Hongli Wang, Yulei Wang, Zhiwei Lu,