کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5029065 | 1470656 | 2017 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The Effect of Flotation Reagents Addition (MIBC and PAX) on the Relative Permittivity Value Using 2-Electrode Capacitance Sensor
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In general, frother and collector are used as reagents to obtain an optimum condition in flotation processes. In this study, the effect of methyl isobutyl carbinol (MIBC) frother and potassium amyl xanthate (PAX) collector on the relative permittivity value using 2-electrode capacitance sensor was conducted. The objective of this study is to know the relative permittivity value of the material affected by MIBC and PAX additions. Permittivity obtained from this study would be used as basic data which is used to analyze the metallurgical performance of flotation process based on the 3-dimensional images (permittivity distribution) using electrical capacitance volume tomography (ECVT) in the further researches. Signal generator, oscilloscope, and 2-electorde capacitance sensor (electrode dimension of 40 x 40 mm) were used to measure the relative permittivity of sample which the samples were measured by using a frequency of 2.5 MHz at room temperature. Frother and collector concentration used in this study were 0.006; 0.085; 0.113; 0.169; and 0.226 Molar of MIBC, and 0.004; 0.007; 0.011; and 0.015 Molar of PAX, respectively. Based on this study, it can be concluded that the relative permittivity value decreases with increasing of MIBC frother and increases with increasing of PAX collector. Minimum and maximum relative permittivity values obtained in this study were 9.70 and 9.72for the frother addition, and 11.12 and 11.17 for the collector addition.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia Engineering - Volume 170, 2017, Pages 369-372
Journal: Procedia Engineering - Volume 170, 2017, Pages 369-372
نویسندگان
Didied Haryono, Harisma Nugraha, Mahfudz Al Huda, Warsito Purwo Taruno, Sri Harjanto,