کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5079588 1477541 2015 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of lot size and planned lead time on service level and inventory for a single-stage production system with advance demand information and random required lead times
ترجمه فارسی عنوان
تأثیر اندازه و طول زمان برنامه ریزی شده در سطح خدمات و موجودی برای یک سیستم تولید تک مرحله ای با اطلاعات تقاضای پیشین و زمان سربسته مورد نیاز
ترجمه چکیده
در این مقاله، یک سیستم تولید تک مرحله ای با اطلاعات تقاضای پیشنهادی و زمان سربسته مورد بررسی قرار می گیرد که مواد مختلف را با مقادیر مشخصه مورد و زمان سربسته برنامه ریزی شده تولید می کند. مدل سازی تصادفی برای بررسی تأثیر پارامترهای پارامترهای برنامه ریزی مرتبط و مدت زمان برنامه ریزی شده بر روی سطح خدمات و موجودی افراد کلیدی مورد استفاده قرار می گیرد. رابطه بین پارامترهای برنامه ریزی با توزیع زمانی تولید تولید داخلی که به میزان زیادی بستگی دارد، پیاده سازی می شود. علاوه بر این، هر دو پارامترهای برنامه ریزی منجر به پیش تولید بر روی سهام یا ناشناس (اندازه زیادی) و یا از سفارشات مشتری شناخته شده (زمان سربسته برنامه ریزی شده). بیشتر مطالعات تحلیلی در این زمینه بر روی بهینه سازی برنامه زمانبندی برنامه ریزی شده، با فرض پردازش تک محصول یا توزیع پردازش سفارش تولید از پیش تعریف شده، یا بهینه سازی حجم های تولید، با توجه به اثر زمان سرباز برنامه ریزی شده، تمرکز می کنند. سهم اصلی این مقاله این است که آن را به طور همزمان درمان این دو پارامتر برنامه ریزی مرتبط با زمان تولید تولید درونی را فراهم می کند. نتایج تحلیلی، بهینه سازی عددی پارامترهای برنامه ریزی را برای رسیدن به سطح محدودیت سرویس با حداقل موجودی کل، امکان می دهد، برای مثال، برای بحث در مورد تأثیر نیاز مشتری برای زمان بندی زمان مناسب برای پارامترهای برنامه ریزی بهینه استفاده شود. نتایج مطالعات عددی نشان می دهد که برای اهداف سطح خدمات متوسط، اندازه های بهینه به اندازه زمان تولید نزدیک به زمان تولید، به حداقل رساندن اندازه بطری هستند. علاوه بر این، نتایج نشان می دهد که اندازه های بزرگتر می تواند سطح خدمات را برای مقادیر پیش بینی شده از زمان پیش تعیین شده کاهش دهد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
In this paper a single-stage make-to-stock production system with advance demand information and random required lead times is investigated which produces different items with item specific lot sizes and planned lead times. Stochastic modeling is applied to investigate the influence of the interrelated planning parameters lot size and planned lead time on the key figures service level and inventory. The interrelation between the planning parameters is implemented with an endogenous production lead time distribution which depends on the lot size. Furthermore, both planning parameters lead to a pre-production on stock either anonymous (lot size) or of known customer orders (planned lead time). Most analytical studies in this field either focus on planned lead time optimization, assuming single item processing or predefined production order processing distribution, or on the optimization of production lot sizes, neglecting the planned lead time effect. The main contribution of this paper is that it provides a simultaneous treatment of these two planning parameters linked to an endogenous production lead time. Analytical results enable the numerical optimization of both planning parameters to reach a service level constraint with minimum overall inventory and can, e.g., be applied to discuss the effect of customer required lead time variance on optimal planning parameters. Numerical study results indicate that for moderate service level objectives, optimal lot sizes are near the production lead time minimizing lot size. Furthermore, the results show that higher lot sizes can reduce the service level for predefined planned lead time values.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Production Economics - Volume 170, Part B, December 2015, Pages 478-488
نویسندگان
,