Text legibility for projected Augmented Reality on industrial workbenches

• We studied and evaluated the legibility of projected text on industrial workbenches surfaces.
• Projected AR can be used effectively as an alternative to monitor for displaying technical information.
• Legibility performance is not influenced by texturization of the projection surface.
• Legibility performance is reduced by tactile irregularities on the projection surface.
• Projected blue text is hardly readable; solutions must be found for it.

Augmented Reality is a promising technology for the product lifecycle development, but it is still not established in industrial facilities. The most relevant issues to be addressed relate to the ergonomics: avoid the discomfort of Head-Worn Displays, allow the operators to have free hands and improve data visualization. In this work we study the possibility to use projection-based Augmented Reality (projected AR), as optimal solution for technical visualization on industrial workbenches. In particular, text legibility in projected AR is difficult to optimize since it is affected by many parameters: environment conditions, text style, material and shape of the target surface. This problem is poorly addressed in literature and in the specific industrial field. We analyze the legibility of a set of colors prescribed by international standards for the industrial environments, on six widely used industrial workbenches surfaces. We compared the performance of 14 subjects using projected AR, with that using a traditional LCD monitor. We collected about 2500 measurements (times and errors) through the use of a test application, followed by qualitative interviews. The results showed that, as regards legibility, projected AR can be used in place of traditional monitors in most of the cases. Another not trivial finding is that the influence on legibility of surface irregularities (e.g., grooves, prominences) is more important than that of surface texturization. A possible limitation for the use of projected AR is given by the blue color, whose performance turned out to be lower than that of other colors with every workbench surface.