Chemical and microstructural transformations in lithium iron phosphate battery electrodes following pulsed laser exposure

Multi-layer lithium iron phosphate (LFP) battery electrodes are exposed to nanosecond pulsed laser radiation of wavelength 1064 nm. Test parameters are chosen to achieve characteristic interaction types ranging from partial incision of the active coating layers only to complete penetration of the electrodes with high visual cut quality. Raman spectroscopy is performed on unexposed regions and at points approaching each incision, highlighting changes in chemical composition and microstructure in the heat affected zone (HAZ). Thermogravimetric analysis is performed on the unexposed electrode active materials to distinguish the development of compositional changes under conditions of slow heating below the melting and sublimation temperatures. A brief theoretical description of the physical phenomena taking place during laser exposure is provided in terms of direct ablation during each laser pulse and vaporization or thermal degradation due to conductive heat transfer on a much longer time-scale, with characteristics of the HAZ reported in terms of these changes. For all laser exposures carried out in the study, chemical and microstructural changes are limited to the visible HAZ. Some degree of oxidation and LFP olivine phase degradation is observed in the cathode, while the polycrystalline graphite structure becomes less ordered in the anode. Where complete penetration is achieved, melting of the cathode active layer and combustion of the anode active layer take place near the cut edge due to thermal conduction from the metallic conductive layers. The presented results provide insight into the effects of laser processing on LFP electrode integrity.