کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5363230 | 1388298 | 2008 | 4 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Modifying the properties of fluorinated amorphous films using argon by filtered cathodic vacuum arc Modifying the properties of fluorinated amorphous films using argon by filtered cathodic vacuum arc](/preview/png/5363230.png)
Fluorine-doped amorphous carbon (a-C:F) films were deposited using a 90°-bend magnetic filtered cathodic arc plasma system with CF4 as a precursor and the addition of argon gas. The microstructure, composition and chemical bonding nature of the a-C:F films were investigated by Raman scattering spectroscopy and X-ray photoelectron spectroscopy. The surface morphology and roughness of a-C:F films were observed through an atomic force microscope. Hardness was measured by nano-indentation. Water contact angles were measured by the sessile drop method. The fluorine content of the films increases with the argon flux. Because of the increase of the fluorine content in the films, the film surface becomes rougher; the hardness decreases, and the contact angle increases from 76.2° to 87.8°. This work demonstrates that an appropriate amount of the admitted argon to the plasma would promote the doping of the films with fluorine, and influences the properties of the a-C:F films.
Journal: Applied Surface Science - Volume 255, Issue 5, Part 1, 30 December 2008, Pages 2139-2142