کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5365453 | 1388331 | 2010 | 6 صفحه PDF | دانلود رایگان |
The oxidation process on silicon carbide (SiC) surfaces is important for wide bandgap power semiconductor devices. We investigated SiC oxidation using supercritical water (SCW) at high pressure and temperature and found that a SiC surface can be easily oxidized at low temperature. The oxidation rate is 10 nm/min at 400 °C and 25 MPa, equal to that of conventional thermal dry oxidation at 1200 °C. Low-temperature oxidation should contribute to improved performance in future SiC devices. Moreover, we found that SCW oxidation at 400 °C forms a much smoother SiO2/SiC interface than that obtained by conventional thermal dry oxidation. A higher oxidation rate and smaller microroughness are achieved at a lower oxidation temperature owing to the high density of oxidizers under SCW conditions.
Journal: Applied Surface Science - Volume 256, Issue 22, 1 September 2010, Pages 6512-6517