The effect of working pressure on the chemical bond structure and hydrophobic properties of PET surface treated by N ion beams bombardment

Polyethylene terephthalate (PET) surface was bombarded by N ion beams at room temperature. Varying the working pressure of the ion beams, PET surfaces with different composition and properties were obtained. Characterization by X-ray photoelectron spectrometry showed that only on film surface, ester bonds, especially C-O bonds, were broken and N element chemical bonded with C. The influence depth was less than 5 nm because of the lower ion energy (about 103 eV). Contact angle results revealed that with increasing the working pressure of ion beams, the contact angle of PET surface to pure water increased from 51° to 130°. With these results, one conclusion could be deduced that the hydrophilic and hydrophobic properties of PET surface could be influenced by N atom chemical bond with C, which in turn is controlled by the working pressure of N ion beams.